M8 male 0° A-cod. IDC

3-pol., 0,25 - 0,5mm², 2,5 - 5mm

Available

IDC terminals
Male straight
M8, 3-pole
Connection cross section: 0.25...0.5 mm²

Side 1

Electrical data | Supply

Operating voltage AC max.	48 V
Operating voltage DC max.	60 V
Current operating per contact max.	4 A

Installation

Connection cross section min.	0,25 mm²
Connection cross section max.	0,5 mm²

Installation | Connection

Wire insulation diameter min.	1,1 mm
Wire insulation diameter max.	1,55 mm
Connection	Cut clamps IDC
Mounting set	M8 x 1
Mating cycles min.	100

Device protection | Electrical

Additional condition protection degree	inserted, screwed
Pollution Degree	3
Rated surge voltage	0,8 kV
Insulation resistance min.	100 MΩ
Material group (IEC 60664-1)	III
Overvoltage category (EN 60950-1)	II

Mechanical data | Material data

Mechanical data | Mounting data

Mounting method	Hexagonal screw, Hexagonal nut
Clamping range min.	2,5 mm
Clamping range max.	5 mm
Looking techniques	Schraubgewinde

Environmental characteristics | Climatic

Operating temperature min.	-25 °C
Operating temperature max.	80 °C

Conformities, approvals, certificates

Product standard	DIN EN 61076-2-114 (M8)

Data Regarding Article:

Product-PDF
Approval: UL Registered CA 7000-08325-0000000_E224242-ECBT8_urc_z_b.pdf (B)
Approval: UL Registered US 7000-08325-0000000_E224242-ECBT2_ur_z_b.pdf (B)
Construction files: STP 7000-08325_stp_x_b.zip (B)
Document: Installation guide 7000-08325-0000000_ina_x_03.pdf (03)
Information: Certificate of conformity Murrelektronik GmbH 10-11-20_(1) RoHS REACh exception 6c_DoC_z_a.pdf (04)
Information: Certificate of conformity Murrelektronik GmbH 07-02-23_(5) China RoHS 2 50EEP_DoC_z_a.pdf (01)
Information: Certificate of conformity Murrelektronik GmbH 17-10-21_(6) California Prop65 Ni surface_DoC_z_b.pdf (01)
Information: Certificate of conformity UKCA con_01-10.21_uk_z_b.pdf (B)
Information: EU declaration of conformity con_01-10.21_ce_z_b.pdf (B)

---- Cable Stripper ----

---- Connection Cable ----